User's Manual
210
Procedure
Step 1 Select Main Menu > ALARM > Video Detection > Video Loss.
Figure 5-171 Video Loss
Step 2 Select a channel and then click to enable the function.
Step 3 Click Setting next to Schedule to configure the alarm schedule.
Step 4 Configure alarm linkage. For details, see Network Video Recorder_User's Manual.
Step 5 Click Apply.
5.10.5.3 Video Tampering
Background Information
When the camera lens is covered, or the video is displayed in a single color because of
sunlight status, the monitoring cannot be continued normally. To avoid such situations, you
can configure the tampering alarm settings.
Procedure
Step 1 Select Main Menu > ALARM > Video Detection > Video Tampering.
To Next Page
Loading...
