Dahua N82B3P

User's Manual
225
Parameter
Description
Refresh
Search for the sites again.
Disconnect
Disconnect the current connection.
Connect
Select an available site and then click Connect.
Step 3 Click Apply.
●
After the connection is successful, a Wi-Fi connection signal flag appears in the
upper-right corner of the live view page.
●
The Wi-Fi module models currently supported are D-LINK, dongle and
EW-7811UTC wireless cards.
5.11.5 Wi-Fi AP
Background Information
You can configure Wi-Fi parameters for the NVR to ensure that a wireless IPC can connect to
the NVR through Wi-Fi AP.
This function requires the built-in Wi-Fi module in the Device.
5.11.5.1 General Settings
Background Information
You can configure SSID, encryption type, password and channel of the device.
●
This function is supported on select wireless models.
●
When the wireless IPC and NVR are matched, the pairing will be completed in 120
seconds after they are powered on.
Procedure
Step 1 Select Main Menu > NETWORK > Wi-Fi AP > General.