User's Manual
241
Figure 5-199 Alarm center
Step 2 Click to enable the function.
Step 3 Configure the parameters.
Table 5-62 Alarm center parameters
The IP address and communication port of the PC installed with
alarm client.
Select time cycle and specific time for uploading alarm.
Step 4 Click Apply.
5.11.16 Register
You can register the Device into the specified proxy server which acts as the transit to enable
the client software to access the Device
Prerequisites
●
The proxy server has been deployed.
●
The Device, the proxy server and the device running the client software are on the same
network.
Procedure
Step 1 Select Main Menu > NETWORK > Register.
To Next Page
Loading...
