User's Manual
39
For uninitialized cameras, the Device automatically initializes them before
adding them.
3) Enable H.265 Auto Switch
When H.265 Auto Switch is enabled, the video compression standard of added
remote devices is switched to H.265 automatically.
4) Double-click a camera, or select a camera and then click Add to register it to the
Added Device list.
5) Click Next.
Step 5 Manage HDD. You can view HDD name, physical position, health status, capacity,
and more.
●
To configure read/write property, select an option from the Properties
drop-down list.
●
To format an HDD, select the HDD, and then click Format.
Figure 5-8 Manage HDD
Step 6 Click OK.
When the Device prompts whether to restart, click OK. The configurations through
startup wizard take effect after the Device restarts.
5.3 Login
Background Information
Log in to the Device to perform local operations.
To Next Page
Loading...
Need help?
General
