Dahua N82B3P

User's Manual
242
Figure 5-200 Register
Step 2 Click to enable the function.
Step 3 Configure the parameters.
Table 5-63 Register parameters
Function
Description
Server Address
Enter the IP address or domain name of the server that you
want to register to.
Port
Enter the port of the server.
Sub-Device ID
Enter the ID allocated by the server.
Step 4 Click Apply.
5.11.17 Switch
Background Information
After setting Switch, when an IPC is connected to the PoE port, the system automatically
assigns the IP address to the IPC according to the defined IP segment, and the NVR will
automatically connect to the IPC.