Dahua N82B3P

User's Manual
167
Table 5-37 Parameters of fall detection
Parameter
Description
Name
Customize the rule name.
Sensitivity
Set alarm sensitivity.
Duration
Set the minimum time of triggering an alarm when people fall.
Repeat Alarm Time
Set repeat alarm time. If the alarm-triggering event continues, an
alarm will be triggered again when repeat alarm time passed.
3) Click OK.
Step 5 Configure alarm schedule and linkage.
Figure 5-134 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 6 Click Apply.