Dahua N82B3P

User's Manual
280
Figure 5-241 802.1x
Step 2 Select the Ethernet card you want to certify.
Step 3 Select Enable and configure parameters.
Table 5-71 802.1x parameters
Parameter
Description
Authentication
●
PEAP: protected EAP protocol.
●
TLS: Transport Layer Security. Provide privacy and data
integrity between two communications application
programs.
CA Certificate
Enable it and click Browse to import CA certificate from flash
drive. For details about importing and creating a certificate, see
"5.14.4 CA Certificate".
Username
The username shall be authorized at server.
Password
Password of the corresponding username.
Step 4 Click Apply.