User's Manual
294
Figure 5-255 Date and time
Step 2 Configure the settings for date and time parameters.
Table 5-76 Data and time parameters
In the System Time box, enter time for the system.
Click the time zone list, you can select a time zone for the
system, and the time in adjust automatically.
Do not change the system time randomly; otherwise the
recorded video cannot be searched. It is recommended to
avoid the recording period or stop recording first before you
change the system time.
In the Time Zone list, select a time zone for the system.
In the Date Format list, select a date format for the system.
In the Date Separator list, select a separator style for the date.
In the Time Format list, select 12-HOUR or 24-HOUR for the
time display style.
Enable the Daylight Saving Time function. Click Week or Date.
Configure the start time and end time for the DST.
To Next Page
Loading...
