Dahua NVR100 series - Nvr11;11-P;41;41-P;41-8 P;41-W;21-S2;21-P-S2;21-8 P-S2;41-4 Ks2;41-P-4 Ks2;41; 4 KS2 Series; Nvr11 H;11 H-P;41 H;41 H-P;41 H-8 P;11 Hs;21 Hs-S2;21 Hs-P-S2;21 Hs-8 P-S2; 41 HS-W-S2;41 HS-4 KS2; 41 HS-P-4 KS2;41 HS-8 P-4 KS2 Series

143
3.4.2 NVR11/11-P/41/41-P/41-8P/41-W/21-S2/21-P-S2/21-8P-S2/41-4KS2/41-P-4KS2/41
-8P-4KS2 Series
○
1 . Loosen the screws of the bottom of
the chassis.
○
2 Place the HDD in
accordance with the four holes in
the bottom.
○
3 Turn the device upside
down and then secure the
screws firmly.
○
4 Connect the HDD cable and power
cable to the HDD and the mainboard
respectively.
○
5 Put the cover back and then
fix the screws of the rear panel.
The installation is complete.
3.4.3 NVR11H/11H-P/41H/41H-P/41H-8P/11HS/21HS-S2/21HS-P-S2/21HS-8P-S2/
41HS-W-S2/41HS-4KS2/ 41HS-P-4KS2/41HS-8P-4KS2 Series