Dahua NVR100 series User Manual

382
Figure 5-19
5.9 WAN Login
In WAN mode, after you logged in, the interface is shown as below. See Figure 5-20.
Figure 5-20
Please refer to the following contents for LAN and WAN login difference.
1) In the WAN mode, system opens the main stream of the first channel to monitor by default. The
open/close button on the left pane is null.
2) You can select different channels and different monitor modes at the bottom of the interface. See

Dahua NVR100 series Specifications

General

Brand	Dahua
Model	NVR100 series
Category	Network Hardware
Language	English