Dahua NVR100 series - Plate Recognition

475
Figure 5-158
Step 4 Select a channel number and then click OK.
Step 5 Set detection type as IVS and then set start time and end time.
Step 6 Click Historic Analytics.
Device displays the corresponding image.
Step 7 Click the image; you can view the record file.
 Select a file and then click , you can save current file to peripheral storage device.
 Select a file and then click , you can lock current file in case it will be overwritten in the
future
 Select a file and then click , you can mark the time of the detected event.
5.13.2 Plate recognition
It is to search and playback the record file containing the plate number.
Step 1 From main menu->Operation->Smart Play.
Enter the smart play interface. See Figure 5-159.