Dahua NVR100 series - Page 439

429
Figure 5-83
 Duration: System can generate an alarm once the object is in the zone for the specified period.
 Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5.
Click to draw the rule.
Click OK to complete the rule setup.
For detailed setups, please refer to chapter 5.10.3.1.1 motion detect for detailed information.
5.10.3.2.1.7 Fast moving
From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click , and then select rule
type as fast moving, you can see the following interface. See Figure 2-25.
 Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5.