449
Figure 5-113
Please refer to the following sheet for detailed information.
It is to set device name.
It is device channel number.
You can select the language from the dropdown list.
Please note the device needs to reboot to get the modification
activated.
This is to display video standard such as PAL.
Here is for you to select working mode when current HDD is full while
the next HDD is not empty. There are two options: stop recording or
rewrite old files.
Here is for you to specify record duration. The value ranges from 1 to
120 minutes. Default value is 60 minutes.
5.10.5.1.2 Date and time
The date and time interface is shown as in Figure 5-114
To Next Page
Loading...
