User's Manual
146
Figure 4-55
Step 2 Configure parameters.
Table 4-15
Select
Enable
to enable privacy masking. The number
represents the number of masking areas. You can select a
number and drag masking areas to the screen, and you can
also change the size of areas or drag an area to other place.
You can drag up to 4 masking areas to one channel.
Set as device default configuration.
Step 3 Click
Apply
.
4.2.6 Encode
You can set video bit stream and image parameters.
4.2.6.1 Encode
You can set video bit stream parameters such as bit stream type, compression, resolution.
To Next Page
Loading...
Need help?
General
