User's Manual
274
Figure 4-178
Step 2 To configure the settings for the video loss detection parameters, see "4.8.5.1 Motion
Detection".
The video loss function does not have region and sensitivity items.
Step 3 Click
Apply
to complete the settings.
● Click
Default
to restore the default setting.
● Click
Copy to
, in the
Copy to
dialog box, select the additional channel(s) that you
want to copy the motion detection settings to, and then click
Apply
.
4.8.5.4 Scene Change
When the detected scene has changed, system can generate an alarm.
Step 1 Select
Main Menu
>
ALARM
>
Video Detection
>
Scene Changing
.
The
Scene Changing
interface is displayed. See Figure 4-179.
To Next Page
Loading...
Need help?
General
