User's Manual
100
Step 2 Set region, system time zone, and time according to the actual environment, and then click
Next
.
Click to shut down the device. It is suitable for the system integrator or the user to shut
down directly after setting the time zone.
Step 3 Click
Next
.
The
Device Initialization
interface is displayed. See Figure 4-1.
Figure 4-1 Set password
Step 4 Set login password of
admin
. See Table 4-1.
Table 4-1 Password parameters
Parameter Description
User By default, the user is admin.
Password
In the
Password
box, enter the password for admin.
The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter and
special characters (excluding"'", """, ";", ":" and "&").
Confirm Password
Prompt Question
In the
Prompt Question
box, enter the information that can
remind you of the password.
On the login interface, click , the prompt will display to help you
reset the password.
For your device own safety, create a strong password of your own choosing. We also
recommend you change your password periodically especially in the high security system.
Step 5 Click
Next
.
The
Unlock Pattern
interface is displayed. See Figure 4-2.
To Next Page
Loading...
Need help?
General
