User's Manual
101
Figure 4-2 Draw unlock pattern
Step 6 Set unlock pattern.
After set unlock pattern, the
Password Protection
interface is displayed. See Figure 4-3.
●
The pattern that you want to set must cross at least four grids.
●
If you do not want to configure the unlock pattern, click
Skip
.
●
Once you have configured the unlock pattern, the system will require the unlock
pattern as the default login method. If you skip this setting, enter the password for
login.
Figure 4-3 Set password protection
Step 7 Set security questions. See Table 4-2.
●
After configuration, if you forgot the password for admin user, you can reset the
password through the reserved email address or security questions. For details about
resetting the password, see "4.1.3 Resetting Password".
●
If you do not want to configure the settings, disable the email address and security
questions functions on the interface.
To Next Page
Loading...
Need help?
General
