Dahua PFS4218-16GT-190 - Port

Advanced Settings 13
Parameter
Description
Server Address
Input the IP address of the log server.
System Log Level
Select the system log lever, including:
Error

Warning

Notice

Informational

Click Save. Step 3
4.1.2 Port
You can set the port parameters, including speed, duplex, flow control, and so on.
Select Advanced > Configuration > Port. Step 1
The Port Configuration interface is displayed. See Figure 4-9.
Port configuration Figure 4-9
Set the parameters. See Table 4-4. Step 2
Table 4-4 Port parameter
Parameter
Description
Port
Display all the ports.
Link
If the port link is displayed as green, it is connected
successfully. And if the port link is displayed as red, it is not
connected.
Speed
Including Current and Configured. In Current list, if it is
displayed as Down, the port is not connected, and if it is
displayed as a certain speed, the port is connected
successfully. In Configured list, you can set the speed from
the drop-down list.