Advanced Settings 41
Loop protection Figure 4-58
Select Enable Loop Protection as Enabled to enable the function. You can set the Step 2
Transmission Time and the Shutdown Time.
Set the parameters in Port Configuration, including Enabled, Action, and Tx Mode. Step 3
Click Save. Step 4
4.1.5 Aggregation
Aggregation is to form the multiple physical ports of the switch into the logical port. The multiple
links in the same group can be regarded as a logical link with the larger bandwidth.
Through aggregation, the ports in the same group can share the communication flow, to make a
larger bandwidth. Besides, the ports in the same group can back up reciprocally and
dynamically, to enhance the link reliability.
To Next Page
Loading...
