Advanced Settings 40
Radius Figure 4-56
Set the parameters including Timeout, Retransmit, Deadtime, and so on in Global Step 2
Configuration.
Click Add New Server in Server Configuration. Step 3
A new record is added. See Figure 4-57.
Server configuration Figure 4-57
Set the parameters including Hostname, Timeout, Retransmit, and so on. Step 4
Click Save. Step 5
4.1.4.10 Loop Protection
Select Advanced > Configuration > Security > Loop Protection. Step 1
The Loop Protection interface is displayed. See Figure 4-58.
To Next Page
Loading...
