Advanced Settings 39
Nas Figure 4-55
Select the Mode as Enabled to enable Nas in System Configuration. Step 2
Set the parameters including Reauthentication Enabled, Reauthentication Period, Step 3
EAPOL Timeout, Aging Period, and so on in System Configuration.
Set the parameters including Admin State, Port State, and so on in Port Configuration. Step 4
Click Save. Step 5
Radius
Select Advanced > Configuration > Security > 802.1X. > Radius. Step 1
The Radius interface is displayed. See Figure 4-56.
To Next Page
Loading...
