Dahua VTH1520A User Manual

Device Debugging 28
Figure 5-9
Click “Add”.
The system displays “Add” interface, as shown in Figure 5-10.
Figure 5-10
Set VTO parameters by reference to Table 5-3.
Parameter
Description
Rec No.
VTO number.
Register Password
Signaling interactive use in SIP system. Adopt default value.
IP Address
IP address of VTO.
Username
Username and password to login WEB interface of this VTO.
Password
Table 5-3
Click “OK” to complete adding.
Repeat these steps to add other outdoor stations in the group.
5.1.1.7 Add VTH
Add info about all indoor stations (VTH).
 It is necessary to add VTH only when this VTO works as SIP server.
 When there are master VTH and extension, both shall be added.
Select “Household Setting > Room No. Management”.

Dahua VTH1520A Specifications

General

Brand	Dahua
Model	VTH1520A
Category	Intercom System
Language	English