Daihen OTC ALMEGA FD Series User Manual

Chapter 2 Condition Settings
This chapter describes how to set conditions for using the interface panel
screens.
2.1 Condition Settings.......................................................................................2-1
2.1.1 Select whether the screen is displayed.................................................2-1
2.1.2 Display the screen with input signal ......................................................2-2
2.1.3 Setting of the initial status of the common switch..................................2-2
2.1.4 Setting of Enable/Disable of functionless code switch name setting.....2-3
2.1.5 Setting of signal duplication check........................................................2-4
2.1.6 Setting of Enable/Disable of operations of f keys on touch panel .........2-4
2.1.7 Controlling the common switch using an input signal............................2-5
2.1.8 Checking the status of the common switch...........................................2-6
2.1.9 Setting of softkey output signal for general purpose usage...................2-6

Daihen OTC ALMEGA FD Series Specifications

General

Brand	Daihen
Model	OTC ALMEGA FD Series
Category	Robotics
Language	English