Daikin LXE10E-A - 1.3 Basic operation of refrigeration unit

1-2
1.3.1 Starting operation
(1) Connect the power plug to the power supply.
Insert the plug q suited to the power source
voltage, and fasten the plug firmly.
(2) Turn on the main power switch of the power
source facility (outside the unit)
(3) Turn on the circuit breaker w.
(4) Close the control box cover fully.
If it is poorly closed, it will allow water entry.
Check the contact around the packing, and
firmly close the cover. (Refer to the
" CAUTION " on page 6.)
(5) Press the UNIT ON/OFF key e.
1
w
e
Liquid moisture
indicator
1.3 Basic operation of refrigeration unit
01LXE10E-A(1-4)07.2.1910:08AMページ1-2
https://daikin-p.ru