3-5
qPress the MANUAL DEFROST key.
wSelect "ON" indicated on the LED display using the key or the
key, and press the key to determine the setting, then the
defrost operation starts.
※Once defrosting operation starts, the operation mode is not
changeable until the defrosting operation completes. If this key is
pressed during the defrosting operation, it is ineffective.
※Defrosting will not start when the evaporator outlet temperature is
20˚C or higher or the inlet temperature is 5˚C or higher.
MANUAL
DEFROST
MANUAL
DEFROST
q Indicate the temperature data required to be converted into "˚F"
on the LED or the LCD.
w Press the key, then the temperature data displayed in "˚C"
is converted into "˚F" for one minute.
※ If any other key is pressed during the "˚F" indication, the display
switches to "˚C".
LED
LCD
「℃」display 「°F」display
03LXE10E-A(1-14)07.2.194:53PMページ3-5