Min. 10cm from walls
Min. 50cm from walls
Min. 100cm
Min. 50cm from walls
NOTE
Depending on the type of wall, the wall may dirty even at the above installation clearance. ●
In such case, move the unit a safe distance away from the wall.
ATTENTION
Smart installation
Select a location that allows air to reach the entire room. ●
Air is blown slightly to the right, but nothing is wrong with the unit. ●
Set the unit on a stable fl oor. Unless the fl oor is stable, the unit may vibrate excessively. ●
Installation
Do not use the unit in the following places.
In contact with walls, furniture, curtains, etc.
Contacted objects may stain or deform.
On thick pile carpets or bedding
The unit may tilt, possibly spilling water or preventing the water level sensor from working correctly.
Exposed to direct sunlight or near to heaters
The unit may deform or discolor and the temperature and humidity sensors and safety devices may malfunction.
Exposed to outdoor air (i.e., by windows, etc.) or drafts from air conditioners, etc.
Room humidity may not be correctly indicated.
Near to curtains, bedding, etc.
The air inlets may be blocked, possibly leading to damage.
On inclined or unstable fl oors
The unit may fall or topple over in earthquakes or if contacted by someone.
If installed on an inclined surface, a safety device may trip and stop the unit.
Exposed to electromagnetic waves such as near to microwave ovens, speakers, etc.
The unit may not work correctly.
To Next Page
Loading...
Need help?
General
