Improper handling may lead to injury or property
damage.
In some situations, the consequences may be grave.
The icons used in this manual mean the following.
Never do.
Be sure to follow the
instructions.
Unplug the power cord. Keep away from fl ames.
Do not disassemble.
Do not handle with
wet hands.
Do not wet.
After reading this manual, keep it in a handy place for future reference by users.
Power supply
cord and plug
Use only a 220 - 240V power supply. •
Other power supplies may lead to fi re or electric shock.
Do not damage, remodel, bend unreasonably, pull, twist or use the •
power supply cord bundled up.
Also, do not place heavy objects on or pinch the power supply cord.
Damage to the power supply cord may lead to fi re or electric shock.
Do not use the unit when the power supply cord or plug is damaged •
or plugged loosely into an electrical socket.
A damaged or loose cord or plug may lead to fi re because of a short circuit or electric shock.
Do not use the unit beyond the rating of the electrical socket or •
branching device.
Exceeding the rating of multiple socket outlets may lead to fi re because of overheating.
Do not insert or remove the power plug to turn the unit ON/OFF. •
Abusive handling may lead to electric shock or fi re because of overheating.
Insert the power plug into the socket all the way to the base. •
Incomplete connections may lead to electric shock or fi re because of overheating.
Periodically clean dust and other matter from the power plug with a •
dry cloth.
Insulation failure caused by humidity or otherwise may lead to fi re.
Stop operation and unplug the power supply cord if detecting •
anything strange such as burning odors.
Continued use the unit in anything strange may lead to electric shock or fi re because of
overheating.
Contact the service shop.
If the power supply cord is damaged, it must be replaced by the •
manufacturer, its service shop or similarly qualifi ed persons in
order to avoid a hazard.
A damaged cord may lead to electric shock or fi re because of overheating.
Before cleaning or relocating the unit, stop operation and unplug the •
power supply cord from the electrical socket.
Handling with the unit plugged in and running may lead to electric shock or injury.
Safety Precautions