Water tank preparations
Air purifying operation can be operated even
without water in the tank.
1
Open the cap on the water tank.
Cap
2
Add water to the tank and close the cap.
Use only tap water.
Add water somewhere that can be wet if spilled. •
Before adding the actual water to use in humidifi cation, •
add a small amount of water to the tank, shake to rinse
internally and discard the water.
Close the water tank cap tightly.
Unless tight, water may leak.
Hold a full water tank by the handle to carry. •
Do not touch the valve at the center of the cap. •
Water may spill from the tank.
Do not touch the
valve at the center
of the cap.
NOTE
Do not add the following to the water tank.
Hot water of 40˚C or more, aromatic oils, chemicals, dirty water, ●
water containing fragrances or solvents, etc.
Liquids of the sort may deform or damage the unit.
Purifi ed water, alkaline ion water, mineral water, well water, etc. ●
These types of water may lead to mildew or bacterial proliferation.
Water Tank Preparations
01_EN_3P234570-1.indd 1701_EN_3P234570-1.indd 17 10/28/2008 12:02:42 PM10/28/2008 12:02:42 PM
To Next Page
Loading...
Need help?
General
