Dakewe(Shenzhen)Medical Equipment Co,. Ltd 20 V4.1
4.4.4 Fixed Card Core
In order to prevent the bumpy transportation from affecting the accuracy of the slicer, the chuck
core is supported by the pearl cotton block. After the whole machine is placed in place, lock the
handwheel at the highest position, buckle the bottom of the supporting EVA cotton, and take out the
EVA cotton. The chuck core can move up and down normally.
4.4.5 Waste Trough Installation
Place the waste trough in the body of the universal specimen clamp in the direction of the
illustration (Figure 10)
To Next Page
Loading...