DAKEWE 6250 - Operation; Section Function Setting; Cooling Temperature Setting

Dakewe(Shenzhen)Medical Equipment Co,. Ltd 23 V4.1
5. Operation
5.1 Section Function Setting
After booting up, the screen enters the working interface.
5.1.1 Cooling Temperature Setting
1. Actual temperature of the box 2. Setting temperature of the box
3. Compressor work instruction
The “+” and “-” buttons are used to set the temperature adjustment. The setting range is -35°C
to 40°C.
(When the compressor stops for less than 3 minutes and receives the signal to start the
compressor again, the compressor will not start immediately, it will be delayed until the stop
time reaches 3 minutes before starting).
Figure 13 The picture of working interface
Figure 14 The picture of cabinet temperature