DAKEWE 6250 - Blade Holder Front and Rear Position Adjustment; Blade Holder Left and Right Position Adjustment; Blade Installation or Replacement

Dakewe(Shenzhen)Medical Equipment Co,. Ltd 32 V4.1
5.6.1 Blade Holder Front and Rear Position Adjustment
Loosen (counterclockwise rotation) the blade holder locking handle for back-and-forth
movement (Figure 39-4). Push back and forth with hands. Lock the handle at the selected
position. When moving to the destination near the operator’s direction, the entire blade holder
can be removed.
5.6.2 Blade Holder Left and Right Position Adjustment
Loosen (counterclockwise rotation) the blade holder handle for left-and-right movement on the
right. Push the blade holder left and right with hands. Lock at the selected position.
5.6.3 Blade Installation or Replacement
Loosen (counterclockwise rotation) the blade clamping handle to widen the gap of the blade
pressing plate. Push the blade withdrawal pusher to take out the blade. Then insert a new blade
from right to left, turn the blade locking handle to allow the blade to be fixed by pressing plate,
and the blade replacement is completed.
After adjustment, make sure that the blade holder is in locked state.
If it is in a frozen state, please do not touch the knife holder directly with your hand. Push
the rubber anti-freeze rubber stopper and gloves to avoid frostbite.
The microtome blade is extremely sharp! Handle with care!
Do not catch the falling blade!