DAKEWE SurePrint S200 - Abnormalities and Troubleshooting; Fault Alarm Types; Faults Handling

VII. Abnormalities and Troubleshooting
68 Dakewe (Shenzhen) Medical Equipment Co., Ltd.
www.dakewemedical.com
VII. Abnormalities and Troubleshooting
(1) Fault Alarm Types
The fault types of the Dakewe Slide Printer are divided into 3 levels, as described in the following
table:
Table 7- 1 Fault alarm types table
No.
Type
Fault alarm description
Alarm method
1
Danger
An imminent danger that if not avoided will result in death or
serious injury.
Display + red light +
sound alert
2
Warning
Potential risks that if not avoided will result in serious injury
or serious damage to the instrument.
Display + sound alert
3
Note
Matters to note or help information.
Display on interface
(2) Faults Handling
1. In case of a fault of the Dakewe Slide Printer, take the following steps to deal with it:

Read error messages;
 Take action according to the instructions in the message prompt;

Check the operation log for fault information records, and perform troubleshooting based on the
fault.
2. If the instrument cannot be turned on, check the power supply as follows:
 Check if the power switch is plugged into the socket and if the socket is working properly;

Verify that the earth leakage protection switch on the back of the instrument is switched on.
If the problem cannot be solved after doing the above steps, please contact service
personnel for inspection and handling.