Daktronics VM-1020 Series User Manual

Conduit Installation
7
4 Conduit Installation
Getting Started
The signal and DC power conduit that interconnects the power and control cabinet
or the power cabinet to the LED panels must be made of steel EMT, RMC, IMC-type
conduit.
Note: All DDMS components must be installed before installing conduit and power
and signal cables.
The size of conduit routing from the DDMS cabinet(s) varies depending on the number of
LED panels in the set. The contractor may choose which type of conduit material to use
unless DC power is in use.
AC Power Conduit
The contractor may choose which type of conduit material to use.
DC Power Conduit
Contact Daktronics for information on which size conduit is needed.
Signal Conduit
The contractor may choose which type of conduit material to use.

Daktronics VM-1020 Series Specifications

General

Brand	Daktronics
Model	VM-1020 Series
Category	Sports & Outdoors
Language	English