Genie HM-HC Series-GigE Vision Camera Operational Reference 33
Operational Reference
Camera and Sensor Information
Camera and sensor information can be retrieved via a controlling application. Parameters such as camera model,
firmware version, sensor characteristics, etc. are read to uniquely identify the connected Genie device.
All these features, with the exception of the DeviceUserId, are read-only. Sapera LT or GigE Vision Compliant calls
are used to retrieve this information and correctly identify the camera along with its characteristics.
Following is an overview of CamExpert displaying this information followed by tables with the feature name
associated to Sapera LT and to GigE Vision Compliant development environments.
Access Via CamExpert
The Camera Information Parameters tab groups information specific to the individual Genie camera.
To Next Page
Loading...
