Dalsa Genie HM640 - Network Controls Via Sapera LT or Gige Vision Compliant Applications

Genie HM-HC Series-GigE Vision Camera Operational Reference  75
Network Controls via Sapera LT or GigE Vision Compliant
Applications
Sapera
Genie Sapera parameters for Network Configuration:
NetworkConfigurationMode = {Automatic = 0, Manual = 1, Optimize = 2}
InterPacketDelay = Minimum delay in µs between image packets
PacketSize = Image packet size in bytes
HeartbeatTimeout = Heartbeat period (watchdog) in ms before camera disconnect
MaximumPacketResend = Sets percentage of packets that can be resent per frame
In CamExpert, these parameters are available under the “GigE Vision” tab.
See "Accessing Features with Sapera++ LT" on page 76.
XML features for Network Configuration:
PayloadSize = Size of the payload in bytes. This is the total number of bytes sent in the payload.
No packet headers included.
GevVersionMajor = Specifies the major version of the GigE Vision specification supported by
this device.
GevVersionMinor = Specifies the minor version of the GigE Vision specification supported by
this device.
GevDeviceModeIsBigEndian = Endianess of Bootstrap registers
(FALSE: Little-endian device, TRUE: Big-endian device)
GevDeviceModeCharacterSet = Describes the character set of all boot strap strings.
GevInterfaceSelector = Index to the network interface to configure.
GevMACAddress = 48-bit MAC address of the selected interface.
GevSupportedIPConfigurationLLA = Indicates if LLA (Auto-IP) is supported by the selected
interface.
GevSupportedIPConfigurationDHCP = Indicates if DHCP is supported by the selected
interface.
GevSupportedIPConfigurationPersistentIP = Indicates if Persistent IP is supported by the
selected interface.
GevCurrentIPConfiguration = Current camera IP configuration of the selected interface.
GevCurrentIPAddress = IP address of the selected interface.
GevCurrentSubnetMask = Subnet mask of the selected interface.
GevCurrentDefaultGateway = Default gateway of the selected interface.
GevPersistentIPAddress = Persistent IP address for the selected interface.
GevPersistentSubnetMask = Persistent subnet mask for the selected interface
GevPersistentDefaultGateway = Persistent default gateway for the selected interface
GevFirstURL = NULL-terminated string to the first URL to the XML device description file.
GevSecondURL = NULL-terminated string to the second URL to the XML device description
file.
GevNumberOfInterfaces = The number of physical network interfaces on this device.
GevMessageChannelCount = The number of message channels supported by this device.
GevStreamChannelCount = Indicates the number of stream channels supported by this device.
GevSupportedOptionalCommandsUserDefinedName = Indicates if the User-defined Name
register is supported.
GevSupportedOptionalCommandsSerialNumber = Indicates if the Serial Number register is
supported.
GevSupportedOptionalCommandsEVENTDATA = Indicates if EVENTDATA_CMD and
EVENTDATA_ACK are supported.
GevSupportedOptionalCommandsEVENT = Indicates if EVENT_CMD and EVENT_ACK
are supported.
GevSupportedOptionalCommandsPACKETRESEND = Indicates if
PACKETRESEND_CMD is supported.
GevSupportedOptionalCommandsWRITEMEM = Indicates if WRITEMEM_CMD and
WRITEMEM_ACK are supported.