Dalsa Spyder 3 S3-10-01k40-00-R User Manual

Spyder 3 CL User's Manual PRELIMINARY 91
DALSA 03-032-20008-03
Mnemonic Syntax Parameters Description
restore user settings
rus
Restores the camera's last saved user
settings and FPN and PRNU
coefficients.
set analog gain
sag
t f
Sets the analog gain in dB.
t = tap selection, either 1 or 2
depending on camera model, or
0 for
all taps.
f= gain value specified from –10 to
+10
set analog offset
sao
t i
Sets the analog offset.
t = tap selection, either 1 or 2
depending on camera model, or
0 for
all taps.
i= Offset value in a range from 0 to
255 (12-bit LSB). Offset increases with
higher values.
set binning horizontal
sbh
m
Sets the horizontal binning value.
Available values are
1 and 2.
set baud rate
sbr
i
Set the speed of camera serial
communication port. Baud rates:
9600,
19200, 57600, and 115200. Default:
9600.
set cable parameter
scb
i
Set the cable parameter. Output
compare value. Available values are: 0-
255.
set ccd direction
scd
i
Sets the CCD shift direction where:
0 = Forward CCD shift direction.
1 = Reverse CCD shift direction.
2 = Externally controlled direction
control via CC3. (CC3=1 forward,
CC3=0 reverse.)
set digital offset
sdo
t i
Subtracts the input value from the
video signal prior to FPN correction.
t = tap selection, either 1 or 2
depending on camera model, or
0 for
all taps.
i = Offset in a range from 0 to
2048DN.

Dalsa Spyder 3 S3-10-01k40-00-R Specifications

General

Brand	Dalsa
Model	Spyder 3 S3-10-01k40-00-R
Category	Color Camera
Language	English