Dalsa Spyder2 - Page 51

51 Spyder2 User’s Manual
03-032-10091-06 Teledyne DALSA
Spyder2 Interface Parameters
Table 6: Framegrabber Interface Parameters
Item (when programmable configuration the
options are separated with a | )
S2-1x-xxx40-xx-L
Imager Dimension <1,2 or 1| 2>
1
Imager Columns<number of active columns, X> 512
1024
2048
Imager Row s<number of acti v e r ow s, Y> Line
Scan/ TDI ar e d efined as 1
1
N umber of Imager Taps <1,2,3…..>
1
Tap Clock Rate <xx M H z> 40
Camera Standard <N TSC, PA L, VS, VW, M W>
VS
Number of Camera Configurations<1,2,3,…> 2
Configuration Definition
Cx= HDW, Number of Output Taps, Bit Width,
N umber of Pr ocessi ng N odes w her e
Cx is the configuration ID x is <1,2,3…>
HDW is <Base, Medium, Full>
Number of Output Taps is <1,2,3…>
Bit w i dth is <8, 10,12…>
N umber Processing N odes is <1 or 2>
C1 = Base, 1, 8, 1
C2 = Base, 1, 10, 1
Tap Reconstruction
In some configurations the reconstruction may
change. C0 is the default output format and must be
listed. Output configurations that don’t conform are
li sted separ ately.
<Cx,Tn (Column Start, Column End, Column
Increment, Row Start, Row End, Row Increment>
512: C0(1, 512, 1, 1, 1, 1)
1024: C0(1, 1024, 1, 1, 1, 1)
2048: C0(1, 2048, 1, 1, 1, 1)
Camera Color
<Hybrid, Mono, Pattern, Solid>
Mono
RGB Pattern Size
<(T1,Columns*Row s)(T2,
Columns*Row s)(T3,Columns*Row s….>
(T1, 1*1)
Color Definition
(Column, Row, Color)
Where color i s R,G,B
T1=(1,1,M )
Row Col or Offset <0,1,2,3…>
0
Col umn Color Offset <0,1,2,3…> 0
Row Binning Factor <1,2,3 or 1| 2| 3> 1
Column Binning Factor <1,2,3 or 1| 2| 3>
1
Pretrigger Pixels <0,1,2…or 0..15> 0
Pretrigger Lines <0,1,2.. or 0..15>
0...15
Line Time Minimum <xx µs> 512: 15.38
1024: 28.57
2048: 55.56