Dalsa Spyder2 - Revision History

68 Spyder2 User’s Manual
03-032-10091-06 Teledyne DALSA
Appendix D
Revision History
Revision
Number
Change Description
00
M anual release
01 Removed Pending from the EMC declaration of conformance, Appendix C
02 Changed pow er dissipation spec on page 7 from <7.5W to 5W. Added Revision
H i story.
03 Removed Preliminary from front cover.
Updated EMC Declaration of Conformity with new codes.
04 In the Spec table on page 7:
Updated N om Dynamic Range fr om 830:1 to 330:1 and added M ax Dynamic
Range of 500:1. Is now referenced to 8 bits rather than 10 bits.
Updated Random N oise rms from 1.6 to 0.75 and 6.4 to 2.2
Updated corrected ECD/ ECE from M ax 3/ 8 to M ax 6/ 8
Updated corrected FPN from M ax 2 to M ax 3.
05 -Revision: "EN 55022: 1998" changed to "EN 55022: 1998 Cl ass B" and "EN 61000
6 1: 2001" r emoved , page 67. EMC Declaration of Conformity.
-Camer a model number revi sed t o S2-1x-xxx40-xx-L
- Default User Calibration Coefficients
description and calibration steps added
to 3.14 H ow to Calibr ate the Camera.
06
Updated EMC Declaration of Conformity statement.