Danfoss BOCK FK40 User Manual

D
GB
F
E
PT
I
TR
Ru
© Danfoss | Climate Solutions | 2023.07
AQ453249013813en-000201| 5
1| Safety
These assembly instructions describe the standard version of the FK40 manufactured by Bock. The
compressor is intended for use in refrigeration systems in compliance with the operating limits.
Onlytherefrigerantspeciedintheseinstructionsmaybeused.
Any other use of the compressor is prohibited!
The Bock refrigerating compressor named in the title is intended for installation in a machine (with-
in the EU according to the EU Directives 2006/42/EC Machinery Directive, 2014/68/EU Pressure
EquipmentDirective).
Commissioning is permissible only if the compressor has been installed in accordance with these as-
sembly instructions and the entire system into which it is integrated has been inspected and approved
in accordance with legal regulations.
1.5 Intended use
1.4 Safety instructions
WARNING Risk of accidents.
Refrigerating compressors are pressurised machines and as such
call for heightened caution and care in handling.
The maximum permissible overpressure must not be exceeded,
even for testing purposes.
Risk of burns!
- Depending on the operating conditions, surface temperatures of
over 60°C on the discharge side or below 0°C on the suction side
can be reached.
- Avoid contact with refrigerant necessarily.
Contact with refrigerant can cause severe burns and skin
damage.

Danfoss BOCK FK40 Specifications

General

Brand	Danfoss
Model	BOCK FK40
Category	Industrial Equipment
Language	English