Service Settings
EY.65.H4.02
38
10. SERVICE SETTINGS
The ECL 2000’s service menus provide facilities for displaying and modifying:
• Heat circuit settings
• Hot-water circuit settings
• Settings concerning the overall operation of the ECL 2000, for example the cur-
rent date and time. These are called Common Functions.
The options that are available in service menus depend on the application that is se-
lected and the setup of the system. This chapter describes all service menu options
that can be available in a ECL 2000. Please disregard any explanations of parameters
not available in your particular system.
Select menu item/
setting
Next/previous picture
See also the service menu overview in Appendix B. The overview shows all available
service pictures and options.
To Next Page
Loading...
Need help?
General
