Danfoss FC 100 Series - 18-** Info & Readouts Parameters

7.3.17 18-** Info & Readouts
Par. No. # Parameter description Default value 4-set-up Change
during
operation
Conver-
sion index
Type
18-0* Maintenance Log
18-00 Maintenance Log: Item 0 N/A All set-ups FALSE 0 Uint8
18-01 Maintenance Log: Action 0 N/A All set-ups FALSE 0 Uint8
18-02 Maintenance Log: Time 0 s All set-ups FALSE 0 Uint32
18-03 Maintenance Log: Date and Time SR All set-ups FALSE 0 TimeOfDay
18-1* Fire Mode Log
18-10 Fire Mode Log: Event 0 N/A All set-ups FALSE 0 Uint8
18-11 Fire Mode Log: Time 0 s All set-ups FALSE 0 Uint32
18-12 Fire Mode Log: Date and Time SR All set-ups FALSE 0 TimeOfDay
18-3* Inputs & Outputs
18-30 Analog Input X42/1 0.000 N/A All set-ups FALSE -3 Int32
18-31 Analog Input X42/3 0.000 N/A All set-ups FALSE -3 Int32
18-32 Analog Input X42/5 0.000 N/A All set-ups FALSE -3 Int32
18-33 Analog Out X42/7 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-34 Analog Out X42/9 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-35 Analog Out X42/11 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-5* Ref. & Feedb.
18-50 Sensorless Readout [unit] 0.000 SensorlessUnit All set-ups FALSE -3 Int32
How to Programme the Frequ...
VLT
®
HVAC Drive Operating Instructions
MG.11.AD.02 - VLT
®
is a registered Danfoss trademark 113
7
7