1.1.1 Copyright, Limitation of Liability and
Revision Rights
This publication contains information proprietary to Danfoss.
By accepting and using this manual the user agrees that the
information contained herein will be used solely for operating
equipment from Danfoss or equipment from other vendors
provided that such equipment is intended for communication
with Danfoss equipment over a serial communication link. This
publication is protected under the Copyright laws of Denmark
and most other countries.
Danfoss does not warrant that a software program produced
according to the guidelines provided in this manual will
function properly in every physical, hardware or software
environment.
Although Danfoss has tested and reviewed the documenta-
tion within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect to
this documentation, including its quality, performance, or
fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use, or
the inability to use information contained in this manual, even
if advised of the possibility of such damages. In particular,
Danfoss is not responsible for any costs, including but not
limited to those incurred as a result of lost profits or revenue,
loss or damage of equipment, loss of computer programs, loss
of data, the costs to substitute these, or any claims by third
parties.
Danfoss reserves the right to revise this publication at any
time and to make changes to its contents without prior notice
or any obligation to notify former or present users of such
revisions or changes.
1.1.2 Available Literature for VLT HVAC Drive
- Operating Instructions MG.11.Ax.yy provide the
necessary information for getting the frequency
converter up and running.
- Operating Instructions VLT HVAC Drive High Power,
MG.11.Fx.yy
- Design Guide MG.11.Bx.yy entails all technical
information about the frequency converter and
customer design and applications.
- Programming Guide MG.11.Cx.yy provides informa-
tion on how to programme and includes complete
parameter descriptions.
- Mounting Instruction, Analog I/O Option MCB109,
MI.38.Bx.yy
- Application Note, Temperature Derating Guide,
MN.11.Ax.yy
- PC-based Configuration Tool MCT 10, MG.10.Ax.yy
enables the user to configure the frequency convert-
er from a Windows
™
based PC environment.
-
Danfoss VLT
®
Energy Box software at
www.danfoss.com/BusinessAreas/DrivesSolutions then
choose PC Software Download
- VLT HVAC Drive Drive Applications, MG.11.Tx.yy
- Operating Instructions VLT HVAC Drive Profibus,
MG.33.Cx.yy
- Operating Instructions VLT HVAC Drive Device Net,
MG.33.Dx.yy
- Operating Instructions VLT HVAC Drive BACnet,
MG.11.Dx.yy
- Operating Instructions VLT HVAC Drive LonWorks,
MG.11.Ex.yy
- Operating Instructions VLT HVAC Drive Metasys,
MG.11.Gx.yy
- Operating Instructions VLT HVAC Drive FLN,
MG.11.Zx.yy
- Output Filter Design Guide, MG.90.Nx.yy
- Brake Resistor Design Guide, MG.90.Ox.yy
x = Revision number
yy = Language code
Danfoss technical literature is available in print from your local
Danfoss Sales Office or online at:
www.danfoss.com/BusinessAreas/DrivesSolutions/Documenta-
tions/Technical+Documentation.htm
Introduction
VLT
®
HVAC Drive Operating Instructions
4 MG.11.AD.02 - VLT
®
is a registered Danfoss trademark
1
To Next Page
Need help?
General
