Danfoss FC 302 - Speed Up;Slow down; Potentiometer Reference

FC 300 Instruction Manual
How to Program
" Speed up/slow down
Terminals 29/32 = Speed up/slow down.
Par. 5 Digital input = Pulse start -10
Par. 5 Digital input = Freeze reference -12
Par. 5 Digita l input = Speed up -13
Par. 5-14 Digital input = Slow down
" Potentiometer Reference
Voltage reference via a potentiometer.
Par. 3-15 Reference Resource 1 [1]
= Analog Input 53
Par. 6-10 Terminal 53, Low Voltage =0Volt
Par. 6-11 Terminal 53, High Voltage =10Volt
Par. 6-14 Terminal 53, Low Ref./Feedb.
Value Value =0RPM
Par. 6-15 Terminal 53, High Ref./Feedb.
Value Value =1,500RPM
Switch S201 = OFF (U)
41
MG.33.A4.22 - VLT is a registered Danfoss trademark