Danfoss FCM305 56 User Manual

FCM 300 Series
MG.03.B6.2G - VLT is a registered Danfoss trademark
Parameters
Range/number
Function of settings Factory setting Parameter No.
Data read-out: Reference XXX.X Parameter 515
Data read-out: Refer. unit Hz/rpm Parameter 516
Data read-out: Feedback Parameter 517
Data read-out: Frequency Hz Parameter 518
Data read-out: Frequency x scale Hz Parameter 519
Data read-out: Current A x 100 Parameter 520
Data read-out: Torque % Parameter 521
Data read-out: Power kW Parameter 522
Data read-out: Power hp Parameter 523
Data read-out: Motor voltage V Parameter 524
Data read-out: DC link voltage V Parameter 525
Data read-out: FC therm. 0 - 100 % Parameter 527
Data read-out: Digital input Parameter 528
Data read-out: External reference -200.0 - +200.0 % Parameter 533
Data read-out: Status word, binary Parameter 534
Data read-out: FC temperature °C Parameter 537
Data read-out: Alarm word, binary Parameter 538
Data read-out: Control word, binary Parameter 539
Data read-out: Warning word, 1 Parameter 540
Data read-out: Warning word, 2 Parameter 541
Data read-out: Terminal 1, analog input mA X 10 Parameter 542
Data read-out: Terminal 2, analog input V X 10 Parameter 543
Operating data: Operating hours 0 - 130,000.0 hours Parameter 600
Operating data: Hours run 0 - 130,000.0 hours Parameter 601
Operating data: Number of power-up's 0 - 9999 Parameter 603
Operating data: Number of overtemp. 0 - 9999 Parameter 604
Operating data: Number of overvoltages 0 - 9999 Parameter 605
Fault log, read-out: Error code Index XX - XXX Parameter 615
Fault log, read-out: Time Index XX - XXX Parameter 616
Fault log, read-out: Value Index XX - XXX Parameter 617
Reset of hours-run counter No reset/reset No reset Parameter 619
Operation mode 3 Normal function Parameter 620
Nameplate: FC motor type Depends on unit Parameter 621
Nameplate: Software version no. Depends on unit Parameter 624
LCP version Depends on unit Parameter 625
Nameplate: Database identification no. Depends on unit Parameter 626
Nameplate: Application option type Parameter 628
Nameplate: Communication option type Parameter 630
BMC software identification Parameter 632
Motor database identification Parameter 633
Unit identification for communication Parameter 634
Software part No. Parameter 635
TT
TT
T
echnical functionsechnical functions
echnical functionsechnical functions
echnical functions
Standard Parameter Settings
■
19-4

Danfoss FCM305 56 Specifications

General

Brand	Danfoss
Model	FCM305 56
Category	Controller
Language	English