Danfoss Link HC User Manual

10
VIFZL35X © Danfoss 04/2011
Installation Guide Danfoss Link™ HC
4. If more devices are installed,
select a device.
5. Select output. Only available
outputs are selectable.
6. Select heating emitter and press
“Actuator Settings”.
7. Select actuator type and press
“OK/Return”.
4: Configure a room
• Forecasting method:
by activation of the forecast
method, the system will automati-
cally predict the heating start-up
time necessary to reach desired
room temperature at desired time.
• Regulation type:
only in connection with electrical
heating systems.
1. Select “Heating regulation”. 2. Select type of regulation.
Configuration

Danfoss Link HC Specifications

General

Brand	Danfoss
Model	Link HC
Category	Controller
Language	English