Danfoss Link HC

8
VIFZL35X © Danfoss 04/2011
Installation Guide Danfoss Link™ HC
1: Adding Danfoss Link™ HC to the system
Adding Danfoss Link™ HC to a system is made from the Danfoss Link™ CC Central Controller. For
further information, see the Danfoss Link™ CC instruction manual: Configuration 7: Adding service
devices.
1. Select “Rooms and Devices”. 2. Select “Add Service Device”. 3. Select “Begin Registration”.
4. Select Install / Link Test on HC. 5. If wanted, edit room name with
the letter keys.
6. End with pressing “OK/Return”.
2: Configure Danfoss Link™ HC
Configuration Danfoss Link™ HC to a system is made from the Danfoss Link™ CC Central Controller.
For further information, see the Danfoss Link™ CC instruction manual: Configuration 7: Adding service
devices.
1. Select “Rooms and Devices”. 2. Select “Manage Devices”. 3. Select device to configure.
Configuration