Danfoss TP4000 Range - Setting the Clock on TP4000; Running Your Programme; Advanced TP4000 Features and Settings; Preparing to Change Preset Programmes

Danfoss Heating
7
GB
FR
ES
NL
GR
PL
CZ
TR
HR
RO
HU
LT
GB
Step 3
RX1 - Press and hold buttons PROG and CH1
for 3 seconds until green light fl ashes once.
Step 4
RX2 (if applicable)
Stat 1 - perform steps 1-3 and 5.
Stat 2 - perform steps 1-2 and then press PROG and CH2 on RX2.
RX3 (if applicable)
Stat 1 - perform steps 1-3 and 5.
Stat 2 - perform steps 1-2 and then press PROG and CH2 on RX3
then step 5.
Stat 3 - perform steps 1-2 and then press PROG and CH3 on RX3.
Step 5
TP4000-RF - Press V or Λ to select temperature - the unit will revert
back to operating mode.
4.0 TP4000/TP4000 RF Programming
For details of this function, please refer to the user instructions.