Page 89 of 108
M-AP-001-EN Rev. N
Environmental Considerations
If the compressor is installed in a humid environment, drip trays may be required to collect
condensate. Insulation should be installed on the suction valve/piping and the end cap as
this is where condensation is most likely to form.
It is recommended to t an End Cap insulator in a humid environment.
External copper piping should be braced to minimize the transfer of vibration to the
compressor.
18.1 Humidity
18.2 Vibration
18 Environmental
Considerations
THIS PAGE INTENTIONALLY LEFT BLANK
To Next Page
Loading...
