Need help?Do you have a question about the Danfoss Turbocor TT-300 and is the answer not in the manual?
General| Model | TT-300 |
|---|---|
| Cooling Capacity | 300 kW |
| Refrigerant | R134a |
| Lubrication | Oil-free |
| Compressor Type | Centrifugal |
| Efficiency | High efficiency |
| Motor Type | Permanent Magnet |
| Power Input | Variable |
Details the settings required for establishing a serial connection with the compressor.
Step-by-step guide to configuring the compressor using the setup wizard.
Configures RS-485 and RS-232 ports for communication with external systems.
Guides on downloading configuration to the compressor or saving it to a file.
Describes how to manage user access levels and change access codes.
How to start and stop the compressor using an analog demand signal.
How to start and stop the compressor using the Modbus network.
How to start and stop the compressor using Chiller Control mode.
Displays major compressor parameters and plots trends on the General Data Page.
Explains how to view, compare, and perform manual bearing calibration.
Allows users to control various compressor parameters like mode, demand, and speed.
Overview of monitoring motor parameters like speed, current, voltage, and power.
Overview of monitoring magnetic bearing parameters, including levitation state and unbalance.
Allows control and tuning of electronic expansion valve stepper motors and analog outputs.
Allows users to control the chiller based on various temperature inputs.
Displays system information like DSP time and system time, and allows clock synchronization.
Accesses detailed EEPROM settings for compressor configuration and parameters.
Provides a log of compressor events and faults, with details and timestamps.
Displays compressor energy usage information and operating hours.
Allows viewing trends of various compressor parameters over time.
Allows viewing compressor faults and their states at the time of occurrence.
To Next Page