Monitor Program Data and Controls
60 Danfoss Turbocor Compressors Inc.
ECD-00007M Rev. 1
6.15 Data Capture
The “Compressor Data Capture Screen” allows the user to
view the compressor data, listed in Table 22, at a particular
instant in time.
To capture the data, click on “Capture Data” from the menu
bar. An “Acquiring Data” message box appears. After the
“Acquiring Data” message box disappears, click on the
“Data Preview” button to view the compressor data. The
acquired data may be saved to file by clicking on the “Save
Data to File” button.
NOTE:
The measurement unit (metric/imperial) displayed depends
on the measurement unit previously set. To verify or change
the measurement unit, refer to section 6.3 "Compressor
Control" on page 23.
Figure 45 Stored Faults Window
To Next Page
Loading...
Need help?
General
